The maintenance and care of wood machine

The maintenance and care of wood machine

2018-01-20 15:18:36

Wood sawdust machine is the special equipment of manufacturing sawdust particles and wood chaff sawdust. The machine is characterized by circular saw blade, multi-chip mounted in series on the shaft, and the shaft is equipped with a set of circular saw blades at the two ends. This equipment can produce sawdust and sawdust particles with suitable particle size and high efficiency and high yield. Tip: The general wood machine can condition particle size within 1-20 cm. Sawdust machine can not only cut and slice, but also can make shavings.

The crushed material is generally used in papermaking, edible fungi, mechanism charcoal, particleboard, sawdust board, MDF and other industrial preparation of the preparation section and single sawdust bran manufacturing base. The focus of the material to cut are logs, branches, bamboo and plates 1. Sawdust bearings should be fed with butter, and when working constantly ,it should be fed every 3-4 hours and pay attention to the bearing temperature of all parts (including the motor).

When finding problems, you should shut down the machine quickly . Manufacture can only be continued after handle exclusion. Driving machine triangle should be adjusted from scratch after a period. Do not be too tight or too loose.

Product Catalog